ADDING A CURTAIN TO THE MULTI REMOTE - PREMIUM RANGE MOTORUpdated 4 months ago

Hello,

Thank you for choosing our Premium Range Motor. Here are the steps to follow to add a blind to your multi-channel remote control:

Video
We have prepared an explanatory video that will guide you through the steps to add a blind to your remote control. You can watch it below:

Video: Adding a Blind to the Multi-Channel Remote Control

Here are the steps to follow:

Connecting the remote control channel to the blind

1. Select remote control channel 2.
2. Press the motor control button of the first blind.
3. Press the "🔼 UP ARROW" button on the remote control.
4. Then, complete the channel connection.

Removing the remote control channel connection

1. Select remote control channel 2.
2. Press the P2 button on the back of the remote control.
3. Press the "Pause" button on the remote control.
4. Press the P2 button on the back of the remote control again.
   The channel removal is now complete.

One remote control channel to control multiple blinds

1. Select remote control channel 3.
2. Press the motor control button of the first blind.
3. Press the "🔼 UP ARROW" button on the remote control.
4. Keep the same channel.
5. Press the motor control button of the second blind.
6. Press the "🔼 UP ARROW" button on the remote control.
   The channel connection is now complete.

Feel free to reach out to us if you have any questions or need further assistance. We are here to help!

Best regards,
STORESRABAIS HELP CENTER