ADJUSTING THE UPPER AND LOWER LIMITSUpdated 4 months ago
Hello,
Here is a simple and detailed guide to setting the upper and lower limits of your motorized shade using the remote control.
This process will allow you to define the maximum up and down positions for your shade.
To assist you, here’s a clear and quick video showing the steps to follow:
➡ VIDEO: ADJUSTING THE UPPER AND LOWER LIMITS
Step 1: Activate Adjustment Mode
- Press the P2 button on your remote control (you will hear a beep).
- Then, press the UP ARROW ⬆️, followed by P2 again. The motor is now ready for limit adjustments.
Step 2: Set the Upper Limit
- Press the UP ARROW ⬆️ to raise the shade to the desired maximum position.
- Once satisfied, press and hold STOP for a few seconds until you hear a confirmation beep.
Step 3: Set the Lower Limit
- Press the DOWN ARROW ⬇️ to lower the shade to the desired minimum position.
- Press and hold STOP for a few seconds to confirm.
Important Notes
- If the limits are correctly set, the motor will automatically exit adjustment mode.
- If limits were previously configured, this process allows you to modify them.
- Be sure to follow the order: set the upper limit first, then the lower limit.
If you have any questions or need further assistance, we are here to guide you.
Best regards,
STORESRABAIS SUPPORT CENTER