SYNC THE REMOTE CONTROL TO THE MOTOR: MOTORIZED CURTAIN RAILUpdated 4 months ago

Hello,

Video: Synchronize the Remote with the Motor
We have prepared an explanatory video that will guide you through the process of synchronizing your remote with the motor of your motorized curtain. You can watch it below:

VIDEO: SYNCHRONIZE THE REMOTE WITH THE MOTOR

Here are the steps to synchronize your remote with the motor of your motorized curtain:

To connect the remote to the motor:

1. Press and hold the remote button for 5 seconds until you hear a beep.
2. Press and hold the PAUSE button for 5 seconds until you hear a beep and see the green lights flash.
3. The connection is successful if the green light stays on when the motor is operating.

To unprogram the remote:

1. Press the button for 5 seconds until you hear a beep.
2. Press and hold the PAUSE button for 5 seconds until you hear a beep and see the green light flash.
3. The unprogramming is successful if no green light appears when you press the remote buttons.

If you have any questions or need assistance, feel free to contact us. We are here to help.

Best regards,
STORESRABAIS SUPPORT CENTER